Selecting The Operation Mode; Single Tests (Tc/Pcc/Meter); Program Tests (Auto) - Kikusui TOS3200 User Manual

Selecting the Operation Mode

Single Tests (TC/PCC/METER)

The TOS3200 has three operation modes. Because each mode is independent, the
TOS3200 can be used in any single operation mode.
A measurement in any of the following modes is called a single test.
• TC Measurement Mode
• PCC Measurement Mode
• Meter Mode (METER)
Each operation mode consists of two screens. Each time you press the MANUAL key, the
screen changes as follows:
• When the first screen (1/2) is selected
• When the second screen (2/2) is selected

Program Tests (AUTO)

You can also execute program tests that combine the TC measurement and PCC measure-
See
p. 73
ment modes. To select the program test, press the AUTO key. For details, see "Program
Test."
TOS3200
MANUAL
The operation mode switches each
time you press MANUAL.
TC1/2 METER1/2
Press MANUAL to return to the first screen. The
MANUAL
operation mode switches each time you press
MANUAL.
TC1/2 METER1/2
TC2/2 METER2/2
PCC1/2
PCC1/2
PCC2/2
3
35