3.0 INSTALLATION
3.1
LOCATING
3.2
UNPACKING
Inside the box you will find-
© Adam Equipment Company 2009
The scales should not be placed in a location
•
that will reduce the accuracy.
Avoid extremes of temperature. Do not place
•
in direct sunlight or near air conditioning vents.
Avoid unsuitable tables. The table or floor
•
must be rigid and not vibrate.
Avoid unstable power sources. Do not use
•
near large users of electricity such as welding
equipment or large motors.
Do not place near vibrating machinery.
•
Avoid air movement such as from fans or
•
opening doors. Do not place near open
windows or air-conditioning vents.
Keep the scales clean. Do not stack material
•
on the scales when they are not in use.
The Scale
Stainless Steel Pan
Power supply Module
An Instruction manual
4