Operation; System Configuration - Hach CLF10sc User Manual

Figure 6 pH flow cell tilt

Operation

User navigation
Refer to the controller documentation for keypad description and navigation information.

System configuration

Sensor configuration and calibration are done through the controller user interface. For more
information on how to configure or calibrate a sensor, refer to the sensor user manual.
An sc model controller must be connected to the gateway.
1. From the controller main menu, select Sensor Setup.
The Chlorine Gateway (CGW) Setup menu is displayed.
2. Select Configure and customize the entries. Confirm after each entry to save the changes and go
back to the Configure menu.
Option
Edit name
Select Parameter—Chlorine (Total or
Free), pH (optional), Temperature
(optional)
Reset Defaults—Confirm to do the reset.
Description
Edit the sensor name
Selects the parameter to be configured. Configuring the
selected parameter requires additional steps. Refer to the
sensor user manual for more information.
Resets all settings to the factory default values.
English 11