Krups ESPRESSERIA AUTOMATIC Manual page 2

Empty the Fill tank
coffee
grounds
collector
/
/
/
/
/
/ /
: Light off
: Light on
Lights
Clean Calc
/
/
/
/ /
/ /
On / Off
The appliance is ready for a coffee or steam cycle.
Slow flashing: the device is in the preheating phase
/
or an initialisation cycle.
/
Double flash: a 2 coffee cycle is in process.
Product support information in operating parameters
setting mode.
Empty the coffee grounds collector (a 2 coffee cycle
/
is underway).
Empty the coffee grounds collector + clean the dra-
wer + empty the drip tray.
Check coffee grounds collector is not missing or
incorrectly positioned. Check cleaning tray is not
missing or incorrectly positioned.
Set water hardness.
Fill tank with water. Check water tank is not missing
or incorrectly positioned.
Coffee cycle has stopped due to lack of water.
/
Fill tank with water.
Setting auto off automatic cut-off.
Cleaning program requested or in process.
Cleaning program: preparing cleaning or rinsing
cycle
Setting coffee temperature.
Scale removal program requested or in process.
Scale removal program: preparing scale removal or
rinsing cycle.
Rinsing cycle or scale removal cycle: request to
empty water tank, rinse it and fill with fresh water.
Long rinse request (around 150 ml) see page 5.
Long rinse in progress.
Constant flashing: operating fault.
/
: Light flashing
/
: Light double flashing
Meaning