Manage Dds - Honeywell ST 700 User Manual

6.2.2 Manage DDs

Using this feature, you can manage the DD files installed with FDC. A DD file contains descriptive
information about the functionality of a device. By default, a set of DD files are installed with FDC.
However, if you do not have a DD for a given device, you can install it using the Add DD feature.
Similarly, you can uninstall a DD file or a set of DD files using Delete DD feature. You can also
directly copy the DD files in appropriate hierarchy using a card reader or Active Sync/Mobile Device
Center mechanisms. In such a case, validate the library view using the "Refresh" feature.
6.2.2.1 Overview
Using Manage DDs, you can view, add, or delete DD files for devices. A list of already available DD
files is maintained in the DD Library. FDC lists the installed DD files in a hierarchy as follows:
Manufacturer
6.2.2.2 Add a DD file
To add a DD file for a device, perform the following steps.
From the FDC homepage, tap Manage DDs > Select.
1.
The Manage DDs dialog box appears.
Tap Options > Add DD.
2.
Or
Tap . The ADD DD files dialog box appears.
Browse to the location in which the DD file (.fm8) is located and tap OK.
3.
If the DD file already exists, then the following message appears.
4.
Tap Yes to overwrite the existing DD files.
5.
If the DD file is added successfully, a success message appears.
6.
6.2.2.3 Delete a DD file
Using this option, you can delete a particular version of a DD file.
Page 28
Device Type
DevRev xx, DDRev yy
DevRev pp, DDRev qq
ST 700 Series HART/DE Option User's Manual
Revision 4.0