Vitocrossal 300 CA3 Series 2.5 to 6.0 Operating
Setting the Display Backlighting
Naming Heating Circuits
Setting the Time and Date
From the home screen tap the following buttons:
1. "Menu"
2. "Settings"
3. "Screen"
4. "Brightness standby" or "Brightness control"
5.
for the required value
6. Press OK to confirm
You can make the following settings only at the system
and lead control boiler section 1.
You can name all heating circuits individually.
From the home screen tap the following buttons:
1. "Menu"
2. "Settings"
3. "Name for heating circuit"
4. Select "Heating circuit 1", "Heating circuit 2" or
"Heating circuit 3" and enter the required name,
such as "Ground floor".
5. Press OK to confirm
The name assigned for each heating circuit appears
in the main menu.
Legend
A Keypad
B Shift between upper and lower case letters
C Text box
D Shift to the number keypad
E Delete individual characters
F Scroll forwards and backwards in the text box
The time and date are factory-set. If your heating system
has been shut down for a prolonged period, you may need
to reset the time and date.
From the home screen tap the following buttons:
1. "Menu"
2. "Settings"
3. "Date / Time"
4. "Date" or "Time"
5.
for the required value
6. Tap OK to confirm
Further Adjustments
29