Using Pc Cards - Prestigio Nobile 1510 User Manual

peripheral devices such as scanner, printer and high-quality CCD, but also consumer electronic equipment such as DVCAM
and VCR.
To connect an 1394 device, simply plug the device cable to the IEEE 1394a port of the system.

Using PC Cards

Your computer has a PC card slot.
PC cards are credit card-sized peripheral products based on the standards developed by PCMCIA (Personal Computer
Memory Card International Association). PCMCIA is a non-profit association for promoting the interchangeability among
mobile computers where ruggedness, low power, and small size are critical.
PC Card Type
Your computer' s PC card slot can accommodate a type II card. Typical type II cards are flash memory, SRAM, modem, LAN,
and SCSI cards.
CardBus Support
Your computer's PC card slot supports CardBus specifications. CardBus is the 32-bit version of PC card technology. It
allows speeds of up to 133 Mbps at 33 MHz. Typical applications are SCSI host bus and high-speed network cards.
Inserting and Removing a PC Card
NOTES:
* Some PC cards require additional system resources. Before using such PC card, you may have to
free other system resources for the PC card.
* Although some PC cards can be inserted and removed without turning off the computer, you
cannot remove or install PC cards during Standby mode.
To insert a PC card:
1. Locate the PC card slot on the left side of the computer.
2. Slide the PC card, with its label facing up, into the slot until the eject button pops out.
3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen
instructions to complete the process.
PRESTIGIO NOBILE 1510
21