Using The Video Features; Configuring The Display Modes - Prestigio Nobile 1510 User Manual

Inserting and Removing a Disc
Follow this procedure to insert or remove a disc:
1. Turn on the computer.
2. Press the eject button and the tray will slide out partially. Gently pull on it until it is fully extended.
3. To insert a disc, place down the disc in the tray with its label facing up. Slightly press the center of the tray until it clicks
into place.
To remove a disc, hold the disc by its outer edge and lift it up from the tray.
4. Gently push the tray back into the drive.
NOTE: In the unlikely event that you are unable to release the tray by pressing the eject button,
you can manually release the tray.

Using the Video Features

The video subsystem of your computer features:
* 14.1/15-inch TFT (Thin-Film Transistor) color LCD display with 1024x768 XGA resolution
* Simultaneous display on LCD and external CRT (VGA), which is useful when you have a presentation as you can control
the screen from your computer and face the audience at the same time.
* Multi-display capability, which allows you to expand your desktop on the screen to another display device so that you
have more desktop space to work on.
* Power Management.
NOTES:
* Before using the multi-display capability, the video driver supplied with your computer must
be installed.
* System enters Standby/Hibernation mode when the LCD is closed. If you want to use the
computer with the LCD closed, set Do Nothing to the "When I close the lid of my portable
computer" option in the Power Options Properties. Thus the computer does not enter Standby
or Hibernation mode when the LCD is closed.

Configuring the Display Modes

NOTES:
* To take advantage of the enhanced video capabilities, the video driver supplied with your
computer must be installed.
* When using external CRT monitor only, the resolution depends on the external CRT monitor's
supported resolution.
14
PRESTIGIO NOBILE 1510