Configuring The Touchpad; Using The Hard Disk Drive - Prestigio Nobile 1510 User Manual

The touchpad consists of a rectangular pad, as well as a left and right button. To use the touchpad, place your forefinger
or thumb on the pad. The rectangular pad acts like a miniature duplicate of your display. As you slide your fingertip across
the pad, the pointer (also called cursor) on the screen moves accordingly. When your finger reaches the edge of the pad,
simply relocate yourself by lifting the finger and placing it on the other side of the pad.
Here are some common terms that you should know when using the touchpad:
Term Action
Point Move your finger on the pad until the cursor points to the selection on the screen.
Click Press and release the left button.
–or–
Tap gently anywhere on the pad.
Double-click Press and release the left button twice in quick succession.
–or–
Tap twice on the pad rapidly.
Drag and drop Press and hold the left button, then move your finger until you reach your destination (drag).
Finally, release the button (drop) when you finish dragging your selection to the destination.
The object will drop into the new location.
–or–
Gently tap twice on the pad and on the second tap, keep your finger in contact with the pad.
Then, move your finger across the pad to drag the selected object to your destination.
When you lift your finger from the pad, the selected object will drop into place.
Scroll To scroll is to move up and down or left and right in the working area on the screen.
This function works only after you install the touchpad driver supplied with the computer and it may
not work for all applications.
TABLE NOTE: If you swap the left and right buttons, "tapping" on the touchpad as an
alternative method of pressing the left button will no longer be valid.

Configuring the Touchpad

You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap
the two buttons so that you can use the right button as the left button and vise versa. You can also change the size of
the on-screen pointer, the speed of the pointer, and so on.
To configure the touchpad, you can use the standard Microsoft or IBM PS/2 driver if you are using Windows. However,
you can install the touchpad driver supplied with your computer to take advantage of more powerful features.

Using the Hard Disk Drive

Your computer comes with a hard disk drive as drive C.
12
PRESTIGIO NOBILE 1510