Mechanical Safety - L-Acoustics KS28 Rigging Manual

Mechanical safety

Mechanical safety
Flown congurations
The KS28 rigging system complies with 2006/42/EC: Machinery Directive. It has been designed following the
guidelines of BGV-C1.
2006/42/EC: Machinery Directive species a safety factor of 4 against the rupture. The own deployments described in
this manual achieve a safety factor of 5 or higher.
Refer to Soundvision for the safety factor of a specic deployment.
The safe limit gives the maximum number of elements for which the safety factor is always compliant with the
2006/42/EC: Machinery Directive, regardless of the other deployment parameters (site angles, inter-enclosure angles,
etc.)
The maximum limit gives the maximum number of elements for which the safety factor can be compliant with the
2006/42/EC: Machinery Directive, when the other deployment parameters provide the best mechanical conditions.
Conguration
Flown
Other congurations
For other congurations, respect the recommended maximum limit for optimal stability.
Conguration
Ground-stacked
Stacked upright
Stacked on chariot
Mechanical safety of the rigging system
Before any installation, always model the system in Soundvision and check the Mechanical Data section for
any stress warning or stability warning.
KS28 rigging manual (EN) version 2.0
Rigging accessory
KS28-BUMP
Rigging accessory
No rigging accessory
No rigging accessory
KS28-CHARIOT
Maximum / Safe limit
16
Maximum limit
4
2
4
8