Table of Contents
Advertisement
M
OS X
AC
O
VERVIEW
This guide is for administrators and it should be used in conjunction with the relevant Mac
OS X manual. Please ensure your Mac has the latest Mac OS X updates installed.
P
RINTING THE CONFIGURATION PAGE
The printer's configuration page reports information that is required for Macintosh
configuration. Refer to
configuration page.
The first six characters of the Ethernet address are the same for all LAN type network
cards. The last six characters of the Ethernet address are unique to each card.
I
NSTALLATION INSTRUCTIONS
You can start the utility directly from the DVD or if you plan to use the utility later, copy it
to your Mac's hard disk.
You can use the Network Card Setup Utility (Macintosh) to assign an IP address and
configure the network interface card. For more background information on the Network
Card Setup Utility, refer to the
the Network Card Setup utility On-line Help.
L
AUNCHING THE NETWORK CARD SETUP UTILITY
Complete the following steps to launch the Network Card Setup utility on Mac OS X:
1.
Ensure that the printer is switched on and connected to your computer and the
network.
2.
Insert the Software DVD-ROM into the DVD-ROM drive and click on the DVD icon on
your desk-top.
3.
Double-click on Utilities > Network Card Setup > English.
4.
Double-click on the Network Card Setup icon. The "Discovering printers..." message
displays. Once the printer is detected, the "Network Card Setup" pane launches,
displaying the printer name and network information.
MC360
MC360
5.
For more information about the Network Card Setup, follow the instructions outlined
below or click the Help button in the "Network Card Setup" pane.
"Self-diagnostic test" on page 5
"Network card setup utility" on page 6
Mac OS X > 17
for details on how to print a
and, on installation,
Advertisement
Table of Contents
