Table of Contents
Advertisement
C
ONFIGURING THE NETWORK PRINTER
The Network Card Setup utility allows you to configure the network printer IP address and
to view the Printer Web Page.
L
AUNCHING THE NETWORK CARD SETUP UTILITY
The following steps describe how to launch and install the Network Card Setup utility:
1.
Ensure that the printer is switched on and connected to the network.
2.
Insert the Software DVD-ROM into the DVD-ROM drive. The Setup Utility starts
automatically. If it does not start, double-click setup.exe (in the root directory) on
the DVD-ROM.
3.
Select the appropriate language option and click I Agree to accept the terms of the
Software Licence Agreement.
4.
Select Software Utilities > Install Network Card Setup. The Network Card
Setup Installshield Wizard is displayed.
5.
Click Next.
6.
Select "I accept the terms of the licence agreement" and click Next.
7.
On the "Select Launch Method" dialog, chose whether to "Launch it now without
installing" or "Install now to use it" and the click Next. If you select "Install now to
use it":
(a)
Click Next again.
(b)
Click Install.
8.
When the "InstallShield Wizard Complete" dialog displays, click Finish.
9.
Select Start > All Programs > Okidata > Network Setup Card > Network
Setup Card.
The "Printer Discovery" message is displayed. When the printer is detected, the
Network Card Setup utility launches, displaying the printer status and network
information.
2 2
NOTE
In the "Network Card Setup", the "IP Acquisition Method" may display as
"Manual". This is because, when using the TCP/IP protocol in an environment
without a DHCP server, you must assign the IP address manually. For
instructions on how to do this, see
page
15.
Now that both Windows and the printer have been configured to use TCP/IP, the next step
is to configure Windows to print to the network printer.
IP
ADDRESS
"Manually configuring the IP address" on
Windows > 14
Advertisement
Table of Contents
