Setting The Ip Address For This Machine - Olivetti MF22 Manual

Network Printing in a Windows Environment
6.2

Setting the IP Address for This Machine

First, use this machine's control panel to assign an IP address to this
machine.
Note
When specifying network settings, follow the instructions of the
network administrator.
Setting procedure
1
Press the [Utility] key on this machine's control panel, touch [Admin.
Mode], and then enter the administrator access code.
2
Touch [Network Setting], [Common Setting], then [TCP/IP].
3
Specify settings for the following.
IP Address:
H
Set the IP address of this machine.
Subnet Mask:
H
Set the subnet mask for the network to which you are connecting.
Gateway Address:
H
Set the default gateway address for the network to which you are
connecting.
Note
Although the IP address is entered without using the DHCP server
in the procedure described here, it is also possible to automatically
assign the IP address from the DHCP server. When "DHCP" is set
to "Enable", the IP address, subnet mask, and gateway address
settings are automatically assigned from the DHCP server on the
6
6-3