Purpose of this manual
Related manuals
Contents
Trademark
BDX-E1000
Manual Structure
This manual is the installation manual of the BDX-E1000 MPEG Encoder Unit and
the following optional boards.
. Audio Input Board
. 4:2:2 Profile Upgrade Board BDKP-E1003
. Scrambler Board
. Scrambler Board
This manual is intended for use by trained system and service engineers, and
describes information regarding installation.
Besides this Installation Manual, the following manuals are available for the BDX-
E1000.
. . . . . Operation Manual (Supplied with the BDX-E1000)
This manual explains the overview of the BDX-E1000, and the system configura-
tion examples.
. . . . . Maintenance Manual (Not supplied with the BDX-E1000)
This manual describes information that premise the service based on parts replace-
ment (adjustments, board layouts, schematic diagrams, parts list, etc.) and infor-
mation that premise the service based on block and board replacement.
If this manual is required, contact your local Sony Sales Office/Service Center.
The following is a summary of all the sections for understanding the contents of this
manual.
Section 1
Installation
Explains the operating environment, the connector information for peripheral
equipment connections and the switches on the board for setup.
Section 2
Installation of Optional Boards
Explains how to install the optional boards.
Section 3
Service Overview
Explains the periodical replacement parts and summary of ISR.
. Ethernet is a registered trademark of Xerox Corporation.
BDKP-E1002
BDKP-E1004
BDKP-E1005
3 (E)