Connect The Cordless Handset - Amplicomms PowerTel 1880 User Manual

Connect the cordless handset

1. Open the battery compartment and plug the battery pack
connector firmly into the jack (the connection has polarity
protection).
2. Place the supplied rechargeable battery with the label THIS
SIDE UP facing up and tuck the wires inside the battery
compartment.
3. Slide the battery compartment cover towards the centre of
the handset until it clicks into place.
For a full charge, the handset must be left in the charger for at
least 16 hours (check the charger's power supply!).
Important: Use only the battery supplied with this product.
If the battery needs to be replaced later on the same battery
type must be used.
Helpline 0844 800 6503 (See page 51 for costs and hours of operation)
7