Connect The Cordless Handset - Amplicomms PowerTel 2880 User Manual

Connect the cordless handset

1. Open the battery compartment and insert the batteries. Pay
attention to the correct polarity.
2. Slide the battery compartment cover towards the centre of
the handset until it clicks into place.
For a full charge, the handset must be left in the charger for at
least 16 hours (check the charger's power supply!).
Important: Use only the batteries supplied with this product.
If the batteries need to be replaced later on the same battery
type must be used.
Helpline 0844 800 6503 (See page 51 for costs and hours of operation)
7