Mobile: Connect And Call - Plantronics Savi W730 Quick Start Manual

Mobile: Connect and Call

Your mobile phone can be paired to multiple headsets and hands-free
devices, but it can only be connected to one device at a time. Following are
instructions for pairing your mobile phone to the base.
Press down and hold Bluetooth pairing button (4 seconds) on Savi base until indicator LED
1
flashes red and blue. The base will remain in this mode for 10 minutes. If it goes off, you will
need to press it again.
2 Place Bluetooth mobile phone into search mode. Select
If prompted by mobile phone, type
3
Bluetooth indicator LED on base will turn solid blue when base has an active connection with
mobile phone.
While wearing headset, short press base mobile button.
4
Dial test call from mobile phone.
5
End call by pressing headset call control button.
6
SAVI 7xx
0000 as passcode.
from the list of found devices.
13