Table of Contents
Advertisement
Mobile: connect and call
Your mobile phone can be paired to multiple headsets and hands-free
devices, but it can only be connected to one device at a time. The following
are instructions for pairing your mobile phone to the base.
1
Press down and hold Bluetooth pairing button (4 seconds) on Savi base until indicator LED
flashes red and blue. The base will remain in this mode for 10 minutes. If it goes off, you will
need to press it again.
2
Place Bluetooth mobile phone into search mode. Select
3
If prompted by mobile phone, type
Bluetooth indicator LED on base will turn solid blue when base has an active connection with
mobile phone.
4
While wearing headset, short press base mobile button.
5
Dial test call from mobile phone.
6
End call by pressing headset call control button.
SAVI 7xx
0000
as passcode.
from the list of found devices.
16
Advertisement
Table of Contents
