Circuit Board A - ELNA 6004 Service Manual

Elna International Corps. SA

CIRCUIT BOARD A

To remove
1. Remove thé front panel unit (see page 4)
2. Unpiug thé seven (7) connectors from circuit board A
3. Remove tree (3) set screws and remove thé circuit board A
To attach
1. Attach thé circuit board A with three (3) set screws
2. Insert ail seven (7) connectors
3. Attach thé front panel unit (see page 4)
A = CONNECTOR BASE
B = MAIN MOTOR
C = STEP MOTOR ZIGZAG
D = STEP MOTOR FEED
6004
CIRCUIT BOARD A
E = UPPER SHAFT SENSOR
F = LAMP SOCKET
G = CIRCUIT BOARD C
H = CIRCUIT BOARD A
Page 17
Service manual