Adjusting Feed Balance - ELNA 320 Service Manual

The forward feeding (A) and backward feeding (B) should be equal when sewing stretch stitch
pattern.
<TO ADJUST>
1 Select the straight stretch stitch (
2 Place a piece of paper under the foot. Turn the handwheel to check the needle marks.
3 If the forward feeding (A) is longer than backward feeding (B), turn the adjusting screw in the
direction (C).
4 If the forward feeding (A) is shorter than backward feeding (B), turn the adjusting screw in
the direction (D).
1
A
A
1
A 3 B
2
A
2
A B
A

Adjusting Feed Balance

) and set the stitch length dial at S.S.
A 1
3 B
2
A
3 B
B A
B
14
Adjusting screw
(D) (C)