Adjusting Buttonhole Zero Feed - ELNA 320 Service Manual

Adjusting Buttonhole Zero Feed

If the fabric is fed when sewing a bartack of the buttonhole, correct it as follows:
<TO ADJUST>
1 Sew a test buttonhole to check if the fabric is fed while sewing the bartacks.
2 Remove the cap to access the adjusting screw.
3 If the fabric is fed forward (A), turn the adjusting screw in the direction (C).
If the fabric is fed backward (B), turn the adjusting screw in the direction (D).
4 Attach the cap.
(A)
(B)
Stitch length dial
Bartack
Bartack
16
Adjusting screw
Adjusting screw
(D)
(C)
Cap