2-5-2
Loading Saved Job Settings
This section explains the procedure for loading saved job settings.
1
Press
.
→
The Memory screen is displayed.
2
Select the job number you want
to load.
You can scroll through the screen using
or
the screen.
3
Press
.
→
The Load Confirmation screen appears.
4
Press
.
→
When a pattern with flap for creasing and
fold mode, or a pattern with flap for cover
sheet is saved for the job, the Run - Roller
Gap Instruction screen is displayed.
5
See page 3 in the Quick Start
Guide for the CRF-362 and ad-
just the roller gap, and then press
.
→
The Run - Main screen is displayed. The
job number and name are displayed on the
screen.
CRF-362
on the right side of
Using Job Memory
Job Number
Job Name
59