Horizon Fitness CRF-362 User Manual page 54

Creasing Cover Sheet for Binding
7
Press .
→
The Run - Fine Adjustment - Creasing for
Cover screen is displayed.
When you select the creasing pattern with a
flap, the Run - Roller Gap Instruction screen
is displayed. See page 3 in the Quick Start
Guide for the CRF-362, adjust the roller
gap, and then press
8
Enter the spine width and the
registering point distance.
When you select the creasing pattern with a
flap, enter the "Flap Distance" (The distance
between the corner of the spine and the
flap) and the "Flap Length".
9
Press .
•
Do a test feed and check that the crease is
made in the set position.
10
Press .
54
.
Registering Point Distance Spine Width Setting
CRF-362