Horizon Fitness CRF-362 User Manual page 108

Replacing the Creasing Unit
7
Install the new creasing unit be-
ing aware of the direction of the
creasing unit.
Before installing a new creasing unit or a unit which has been stored over the long term, make sure
the grease applied to the unit is not dry. If the grease has dried up, apply the grease to the part where
the creasing unit touches the slide guides.
Apply grease.
8
Install the creasing depth ad-
justing dials and the two locking
screws.
9
Close the register transport section cover and the fold section cover.
After replacing the creasing unit, see page 72 and adjust the crease depth.
108
Good
13130
Slide Guides
50401H1
Bad
Creasing Unit
Apply grease.
Creasing Depth
Adjusting Dial
13130
50401I1
Locking Screw
13130
50401G1
CRF-362