Changing The Tool - Fein BOP6 Series Instruction Manual

OBJ_BUCH-0000000221-001.book Page 14 Tuesday, July 21, 2015 8:42 AM
en
14

Changing the tool.

Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Mounting application tools (figure 5).
To loosen the lock of the drill chuck, turn the
rear sleeve toward the " " direction.
Unscrew the front sleeve to replace the appli-
cation tool.
Tighten the front sleeve and lock the drill
chuck by turning the rear sleeve toward the
" " direction.