Typical Hardware Configuration - HP Intelligent Power Distribution Unit User Manual

Hide thumbs Also See for Intelligent Power Distribution Unit:
Table of Contents

Advertisement

Flexible mounting in 0U or 1U configurations, maximizing rack space (no additional parts are
required for mounting)
Overcurrent and short-circuit protection for each output (UL-489-listed circuit breakers)
IEC-320 C19 outlets to power Extension Bars, Intelligent Extension Bars, or other IEC-320 C20 plug-
compatible equipment
Easy identification and reset of overload circuits (circuit breakers move to Off position), minimizing
downtime
Power cord retention
Recessed circuit breaker handles to prevent inadvertent power-off
Display Unit features include:
Two-digit LED display that shows the current in each iPDU, load segment/Extension Bar, or Intelligent
Extension Bar outlet in tenths
Three scroll buttons to scroll through values
Two interior LEDs, which indicate power and alarms
One exterior LED, which indicates normal operation
During normal conditions, all iPDU component LEDs illuminate green. The blue UID illuminates on the
Extension Bars to indicate which component corresponds to the current that appears on the Display
Unit.
Intelligent Extension Bar features include:
Multiple power outlets, conveniently located for quick and easy equipment power connections
Green power indicator for the Intelligent Extension Bar and each individual outlet
Blue UID indicator for the component that corresponds to the current that appears on the iPDU
Display Unit
Manual on/off control for each Intelligent Extension Bar, outlet, and outlet UID using the iPDU web
interface
Attached 2.4-m (8-ft) input power cords
Power cord retention
Extension Bar features include:
Multiple power outlets, conveniently located for quick and easy equipment power connections
Green power indicator
Blue UID indicator that illuminates when the Extension Bar current appears on the iPDU Display Unit
Manual on/off control for each Extension Bar UID using the iPDU web interface
Attached 2.4-m (8-ft) input power cords
Power cord retention

Typical hardware configuration

The total number of load segments is six. Load segment 1 always corresponds to the outlet closest to the
Core Unit power cord.
Overview 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents