If the user has administrator rights added or removed, select or deselect the Administrator checkbox.
Click Save Settings to save the updated account information.
To delete a user account:
Select the Delete checkbox for the user account that is to be removed.
Click Delete Users to delete the user account. The account is removed and no longer appears on the
User Accounts screen.
Click Network in the left navigation frame to access the Network screen. This screen contains controls that
enable administrators to configure network settings for the iPDU.
The iPDU MAC address is displayed on the Network screen for informational purposes.
To configure the network settings:
Select a radio button to enable DHCP (IPv4) or Static IP (IPv4). By default, DCHP (IPv4) is enabled.
Change the IP address of the iPDU.
Change the IPv4 network mask of the iPDU.
Change the IPv4 default gateway of the iPDU.
address are automatically displayed.
Enable or disable NTP. Enable NTP to set the date and time automatically. Disable NTP to set the
date and time manually.
If you enabled NTP in step 5:
Enter the IP address of the primary NTP server.
Enter the IP address of the secondary NTP server.
Select the time zone from the dropdown box.
If you are running the IPv6 network, the IPv6 link local address and auto-configured
HP Intelligent PDU web interface 51