HP Intelligent Power Distribution Unit User Manual: Event Notification Messages Do Not Appear On Console Screen

Event notification messages do not appear on

console screen

Action: If you are using SLES 9, upgrade the KDE or use a different desktop, such as GNOME.

Event notifications are not being sent

Action: While email and SNMP trap notifications must be set up on their respective tabs on the Network

Management screen, notifications must also be enabled per event on the Event Notifications tab (on page

57).

Flash update fails over a serial connection

Action: Disable any serial port being configured during the flash update, such as iLO, or use an FTP

connection.

Help files do not appear

Symptom: A Certificate Error: Navigation Blocked warning appears.

Action: Click Continue to this website to view the online help.

HP Power Device Flash Utility does not install

image.bin on a Pentium III

Symptom: The image.bin file is not installed on a Pentium III during a serial upgrade.

Possible Cause: The minimum hardware requirement for the HP Power Device Flash Utility is Pentium 4.

Action: Be sure that the hardware meets the minimum HP Power Device Flash Utility requirements.

HP SIM lists a discovered iPDU as Unmanaged in

the System Type column

Action:

Delete the discovered iPDU from HP SIM.

Using the iPDU web interface, add the HP SIM server as a Manager on the SNMP Managers tab (on

page 55).

Rediscover the iPDU in HP SIM.

Invalid IP address

Action: Verify that the IP address entered is valid.

Troubleshooting 89

Table of Contents