Download Print this page

Advertisement

Control tab
This screen contains controls that enable you to enable or disable outlet control for Intelligent Extension
Bars attached to each load segment. If an Intelligent Extension Bar is not attached to a load segment, no
information appears on the screen for that load segment.
CAUTION:
access using a firewall or isolated network.
The tab name for this screen corresponds to the system name entered on the System Management tab (on
page 53).
NOTE:
The following information is displayed in column format for each load segment:
Device Name—The name of the device connected to the load segment (Device names are added on
the Outlet Device Assignment screen
Feed A Load Segment: Outlet—Identifies the load segment number and Intelligent Extension Bar
outlet number (if attached) for the iPDU on Feed A
Click
or
Feed B Load Segment: Outlet—Identifies the load segment number and Intelligent Extension Bar outlet
number (if attached) for the iPDU on Feed B (if redundant iPDUs are configured)
Click
or
Redundancy Status—Indicates the status of the redundant iPDU configuration, if applicable (
Informational,
Redundancy Control—Includes a checkbox that allows you to enable and disable redundancy
control for the outlet
It is highly recommended that browser access to the iPDU is isolated from outside
Load segment 1 always corresponds to the outlet closest to the Core Unit power cord.
to expand or collapse the outlet information.
to expand or collapse the outlet information.
Normal,
Warning, or
("Outlet Device Assignment
Critical)
menu" on page 45).)
HP Intelligent PDU web interface 43

Advertisement

   Related Manuals for HP Intelligent Power Distribution Unit

Comments to this Manuals

Symbols: 0
Latest comments: