Pdu Thresholds Menu - HP Intelligent Power Distribution Unit User Manual

Enable automatic sign-out and enter the number of minutes the iPDU should wait before
a.
terminating an inactive session.
Enable retries allowed, enter the number of times a user can unsuccessfully log in to the iPDU
b.
before the account is locked, and then enter the number of minutes to wait between an
unsuccessful login and a new login attempt.
Do one of the following:
4.
Click Save Settings to save the information.
o
Click Undo Changes to undo the changes.
o
Click Help to view online help.
o

PDU Thresholds menu

Click PDU Thresholds in the left navigation frame to access the PDU Thresholds screen. This screen
contains controls that enable administrators to configure the warning and critical limits for the iPDU load
segments. To receive a notification when these limits are met or exceeded, you must configure the iPDU to
send event notifications.
NOTE:
To configure thresholds for the iPDU load segments:
For each load segment, enter the warning and critical values for total current in percent. Adjust the
1.
thresholds so that the total load does not exceed the input rating or the rating of the circuit breakers.
For redundant iPDUs, adjust the thresholds to one half of the default value or less to ensure
appropriate load balancing.
Do one of the following:
2.
Click Save Settings to save the information.
o
Click Undo Changes to undo the changes.
o
Click Refresh Page to refresh the screen.
o
Load segment 1 always corresponds to the outlet closest to the Core Unit power cord.
HP Intelligent PDU web interface 59