X8 125-200
- Refit the three handlebar covers as described in
the «Bodywork» Chapter.
- Install the front wheel.
- Refit the brake calliper on the fork leg.
Specific tooling
020055Y Wrench for steering tube ring nut
Locking torques (N*m)
screw fixing handlebar to the steering tube
Upper steering ring nut
÷ 50
er ring nut
10 ÷ 13 then loosen by 90°
screw for calliper support to the fork
Front wheel axle
45 ÷ 50
See also
Refitting the front wheel
Steering bearing
45
Steering low-
30 ÷ 36
Tightening
45 ÷ 55
Suspensions
SUSP - 199