Yamaha AR190 2012 Owner's/Operator's Manual page 80

Operation and handling requirements
(8) Turn the lock handles, and make sure
that the fuel tank compartment cover is
securely closed.
(9) Push the lock handles down.
(10) Install the floor mat in its original position.
Draining the bilge water from the engine
compartment
If there is fuel or a fuel/water mixture in the en-
gine compartment, wipe it up immediately
with dry rags. WARNING! This indicates a
fuel leak. Do not operate the boat until the
source of the fuel leak is found and cor-
rected. Gasoline and its vapors are highly
flammable and explosive.
(1) Open the engine hood.
(2) Remove the engine compartment drain
plug to drain the water.
1 Engine compartment drain plug
(3) If the boat was operated in salt water,
wash down the compartment with fresh
water.
(4) Securely install the drain plug in its origi-
nal position.
(5) Close the engine hood.
74
Draining the bilge water from the hull
Remove the hull drain plugs at the stern to
drain the water, and then securely install the
drain plugs.
1
1 Hull drain plug
1
1