Engine Oil And Oil Filter - Yamaha AR190 2012 Owner's/Operator's Manual

Maintenance
(4) Unfasten the hooks.
1
1 Air filter case
2 Hook
TIP:
There are a total of 8 hooks on the top, bot-
tom, left side, and right side of the air filter
case.
(5) Remove the air filter case cover.
1
1 Air filter case cover
114
2
(6) Remove the screws, and then remove
the air filter element.
1
1 Screw
2 Air filter element
(7) Check that there is no dirt or oil on the air
filter element. If the air filter element is
dirty or oily, replace the element.
(8) Place the air filter element in its original
position, and then install the element to
the air filter case cover using the screws.
(9) Install the air filter case cover, and then
secure the cover using the hooks.
(10) Connect the air intake pipe to the throttle
body, and then tighten the clamp screw.
(11) Connect the breather hose to the air in-
take pipe.
(12) Close the engine hood.

Engine oil and oil filter

WARNING
Engine oil is extremely hot after the engine
is turned off. Coming into contact with or
getting any engine oil on your clothes
could result in burns.
NOTICE
Be sure the engine has enough oil, but
G
do not overfill it. If there is too little oil,
the engine can be damaged. If there is
2