Steering; Tilt Lever - Yamaha AR190 2012 Owner's/Operator's Manual

Table of Contents

Advertisement

Control function operation

Steering

Your boat can be steered by turning the steer-
ing wheel the same direction you wish to trav-
el, to the right or left. When the steering wheel
is turned, the angle of the jet thrust nozzle at
the rear of the craft is changed, and the
change in direction of the jet thrust nozzle
changes the direction of the boat accordingly.
1
1
Steering wheel
Since the strength of the jet thrust determines
the speed and direction of a turn, the throttle
must always be opened above idle when at-
tempting a turn, except at trolling speed.
Because boats steer from the stern, the stern
of the boat swings out in the opposite direction
of your turn. If you turn to starboard, for exam-
ple, the stern of the boat will swing to the left.
Keep this in mind when navigating near a per-
son in the water, such as a down skier, or an
obstacle, such as a dock.
32

Tilt lever

WARNING
Never touch the tilt lever during opera-
G
tion, otherwise the steering wheel could
suddenly change position, which may
lead to an accident.
Be sure the steering wheel is locked in
G
position after adjustment. If the steering
wheel is not locked in position, it may
suddenly change position during opera-
tion, which may lead to an accident.
The tilt lever is located under the steering
wheel and is used to adjust the tilt of the steer-
ing wheel. There are 5 positions.
1
1
Tilt lever
To adjust the tilt:
(1) Push the lever down, and then move the
steering wheel up or down to the desired
position.
(2) The lever will lock into place when the
steering wheel is moved into one of the 5
available positions.
(3) Make sure that the tilt lever returns to its
original position and that the steering
wheel is securely locked in place.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx190 2012

Table of Contents