Premium Leisure Sterling Leisure Owner's Manual page 53

Low-level Settings: XP1 and XP2
The spa pack – located inside the hot tub below the topside control panel – has a
service panel used to set low-level programming options. During troubleshooting,
you may need to check or reset these settings.
Resetting the Spa Pack
To reset the spa pack, press the Select button twice.
Resetting the Low-Level and Breaker Setting
To reset the low-level setting (LL), press
and hold down the Select button for 5
seconds. Use the Change button to set LL
even if it is the present value. Press
Select to save (breaker settings appear
next).
After setting LL, the breaker current setting
(Br) appears. Press the Change button to
select the appropriate value for your
configuration and then press Select to
save.
For export spas, press the change button
to select the number of phases. (Be sure
the copper jumper configuration on the
power terminal matches the phase
number.)
Figure 36 - Spa Pack
Callouts
For HELP, call 727.573.9611
Configuration
Page 53
LL
Model
01
XP1
XP2 02
Br
48
240V 60Hz
240V 50Hz 1 32(16)
240V 50Hz 2
16
240V 50Hz 3
16
Ph
-
1
2
3