Lightspeed 955Access User Manual page 17

4. OUTPUT TO PERSONAL ASSISTIVE
LISTENING DEVICE (ALD)
1.
Turn the AUDIO OUT volume
control on the front panel all the
way down (fully counterclockwise).
MICROPHONE
2. Determine the size and type of
audio input jack on the device as
1 2
many manufacturers' products
MIN MAX
differ in connector size and shape.
Many Personal FM transmitters
require a 3.5 mm to 3.5 mm
patch cable (part# MSC3535, not
included).
3. Connect a patch cable from the
Personal FM's microphone jack or
AUX input to AUDIO OUT jack on
the front of the 955 Access:
4. With the amplifier and ALD turned
on, speak into the Flexmike and
slowly adjust the corresponding
volume control on the amplifier
until the appropriate audio level
is obtained in the Personal FM
receiver.
5. It may be necessary to adjust
the volume on the Personal FM
receiver to achieve appropriate
volume level.
AUDIO IN TONE
MIN MAX TREBLE BASS
POWER
1 2
AUDIO OUT
MIN MAX
MICROPHONE AUDIO IN TONE
MIN MAX MIN MAX TREBLE BASS
AUDIO OUT
MIN MAX
17