Other Information - Baxi Ambiflo User Operating Instructions Manual

Air to water heat pump system 7kw to 10.5kw inclusive

Enlarged version

4.0 Other Information

4.1

Tarriffs

There are a variety of electricity tariffs on offer to suit this type

of appliance. Baxi suggest contacting your local energy supplier

for the details of these tariffs. It may also be advisable to

investigate alternative energy suppliers to compare the costs.

4.2

Important safety notes

1. If fluid or vapour is discharged from the Pressure Relief Valve

or from the Heat Pump itself, isolate the power supply to the

Baxi Ambiflo

Heat Pump and contact Heateam or a qualified

heat pump engineer.

2. Familiarise yourself with the controls and instructions supplied

with the Heat Pump and follow manufacturer's instructions in

the event of a fault.

3. The pipework between the heat pump and the property can

be hot. The installer should have insulated these pipes. This

insulation is important for the safe operation of the unit so in

the event of any damage contact your installer to arrange a

repair. Do not stand on the pipes around the Heat Pump unit

as injury or damage may occur.

4. If the electrical supply for the heat pump system is

interrupted it will not operate. When the power supply is re-

established it may be necessary to reset the clock, for details of

this, please refer to Section 3.3 'Time and Date Setting'..

Programme settings are stored by the controller and should not

need resetting when power is restored.

4.3

Guarding

IMPORTANT - This unit contains electrical components, high

temperatures, pressure, and moving parts. Where young

children or animals are concerned, Baxi recommend a barrier

or guard to avoid tampering.

Table of Contents