ABB ACS310 User Manual page 32

32 Actual values and parameters in the short view
Parameters
No. Name/Value
FRANÇAIS
DANSK
SUOMI
SVENSKA
RUSSKI
POLSKI
TÜRKÇE
CZECH
MAGYAR
9902 APPLIC
MACRO
ABB
STANDARD
3-WIRE
ALTERNATE
MOTOR POT
HAND/AUTO
PID CONTROL PID control. For application in which the drive controls a
PFC
CONTROL
SPFC
CONTROL
LOAD FD SET FlashDrop parameter values as defined by the FlashDrop
USER S1
LOAD
USER S1
SAVE
Description
French
Danish
Finnish
Swedish
Russian
Polish
Turkish
Czech
Hungarian
Selects the application macro. See chapter Application
macros in ACS310 User's Manual (3AUA0000044201
[English]).
Standard macro for constant speed applications
3-wire macro for constant speed applications
Alternate macro for start forward and start reverse
applications
Motor potentiometer macro for digital signal speed control
applications
Hand/Auto macro to be used when two control devices are
connected to the drive:
- Device 1 communicates through the interface defined by
external control location EXT1.
- Device 2 communicates through the interface defined by
external control location EXT2.
EXT1 or EXT2 is active at a time. Switching between EXT1/
2 through digital input.
process value. Eg pressure control by the drive running the
pressure boost pump. Measured pressure and the pressure
reference are connected to the drive.
PFC (pump and fan control) macro for pump alternation
applications
SPFC (soft pump and fan control) macro for pump
alternation applications where lower pressure peaks are
desirable when a new auxiliary motor is started.
file. Parameter view is selected by parameter
PARAMETER VIEW.
FlashDrop is an optional device for fast copying of
parameters to unpowered drives. FlashDrop allows easy
customization of the parameter list, eg selected parameters
can be hidden. For more information, see MFDT-01
FlashDrop User's Manual (3AFE68591074 [English]).
User 1 macro loaded into use. Before loading, check that
the saved parameter settings and the motor model are
suitable for the application.
Save User 1 macro. Stores the current parameter settings
and the motor model.
Def/FbEq
7
8
9
10
11
12
13
14
15
ABB
STANDA
RD
1
2
3
4
5
6
7
15
31
1611
0
-1