SMC Networks raptor User Manual page 89

You must now start up the Raptor-HH VNC server. Press the VNC Server button on the
configuration menu to access the following screen:
Establish
connection.
If you want to contact SMC for remote support, write the remote address: "eurosmc.es"
or press Default host. If, on the contrary, you wish to contact a PC on your local network
or your own PC, you must enter its IP address.
If you are going to connect with SMC, you must wait until you are
told you can press the Connect button.
If you have decided to connect to a PC of your network, a window will appear on this PC
like the one shown below after pressing Connect:
Default host.
PC address in
listening mode.
You will now see an exact copy of your Raptor-HH
screen. You may even press on the keys and execute
certain controls.
Users Guide
89