Samsung AM007FN1DCH/AA Service Manual page 68

No Parts
7 Fan
&
Motor
8 Evaporator
Samsung Electronics
Procedure
1) Turn the hexangular nut attached to the
top of the Fan counterclockwise to remove it.
Take the Fan out of the Motor.
2) Turn the three hexangular nuts on the
Motor counterclockwise to remove the nuts.
Take the Motor Wires attached to these
three locations out with your hands prior to
removing the Motor.
1) Remove the screws of the 2 Steel Holder
Evaps that are used to fix the Heat Exchanger,
and then remove it. (Use +Screw Driver)
2) Remove the 2 fixing screws of the Partition
Evap at the Heat Exchanger's In/Out Pipe.
(Use +Screw Driver)
Disassembly and Reassembly
Remark
3-15