Samsung AM007FN1DCH/AA Service Manual page 67

Disassembly and Reassembly
No Parts
5 Drain Pump
&
Hose
6 Evap.
Temperature
Sensor
3-14
Procedure
1) Remove the 2 fixed screws and
disconnect the white drainage hose from
the Drain Pump. (Use +Screw Driver)
2) Remove the 2 screws and take the
Drain-Hose out from the indoor unit to
disassemble the transparent Drain-Hose
fixed on the side of the indoor unit.
(Use +Screw Driver)
1) Use your hand to remove the temperature
sensor attached to the Evap Pipe along with
the fixing clip.
Remark
Samsung Electronics