Samsung AM007FN1DCH/AA Service Manual page 117

Disassembly and Reassembly
No Parts
4 Heat Exchanger
5 Fan Motor
&
Cross Fan
3-64
Procedure
1) Loosen 2 fixing earth screws(CCW) of right
side. (Use +Screw Driver.)
2) Detach the Connection Pipe.
3) Detach the Holder Pipe at the rear side.
4) Loosen the 4 fixing screws(CCW) of right
and left side. (Use +Screw Driver.)
5) Lifting the Heat Exchanger up a little to
push the up side for separation from the
indoor unit.
First, check Comp. Down and then
disconnect the connection pipes before
you disassemble the Evaporator from
indoor unit.
1) Loosen the fixing screw(CCW).
(Use +Screw Driver.)
2) Detach the Fan Motor from the Fan.
3) Detach the Fan From the left Holder
Bearing.
Remark
Samsung Electronics