Securing The Dishwasher In Cabinet Opening - Danby DDW1801MW Instructions Manual

Securing the Dishwasher in Cabinet Opening

WARNING:
• Do not use dishwasher until completely installed.
• Do not push down on open door.
• Doing so can result in serious injury or cuts.
1. If you have not already done so, open dishwasher door, remove lower dishrack and place towel over pump assembly
and spray arm of dishwasher. This will keep screws from falling into pump area if you unintentionally drop them when
securing dishwasher to countertop.
2. Check that dishwasher is still level and centered side to side in the opening, and that the tub fl ange aligns with the
front face of the cabinet frame.
3. Secure dishwasher to countertop with two, #8 x 5/8" Phillips fl at head screws. The dishwasher must be secured to
keep it from tipping when door is opened.
4. Open door about 3" (7.6 cm) and check that space between inner door and tub is equal on both sides. If spacing is
not equal, loosen bracket screws and shift tub. Tighten bracket screws.
5. Check that top of door does not contact screws, brackets, or countertop. If it does, dishwasher must be lowered and
re-leveled.
6. Remove towel from dishwasher.
7. Reinstall the lower dishrack.
INSTALLATION INSTRUCTIONS
Tip Over Hazard
Screw to Coun-
tertop
17