Step 7 Slide Dishwasher Partiallyinto Cabinet - Danby DDW2405W Installation Instructions Manual

Built-in
Hide thumbs Also See for DDW2405W:
Table of Contents

Advertisement

INSTALLATION
INSTRUCTIONS
STEP 6 INSERT DRAIN HOSE
THROUGH CABINET
• Position the dishwasher in front of he opening.
Insert drain hose into cabinet wall hole.
Insulati
Blanket
Maximum
Drain Hose
10'
TiP: Position water line and house wiring on the floor
to avoid interference with base of dishwasher,
Figure13
Drain
Hose
Wiring
Power S upply
STEP 7 SLIDE DISHWASHER
PARTIALLYINTO CABINET
TO AVOID DAMAGING THE FRONT PANEL, DO NOT PUSH CABINET iN WiTH KNEES.
• Slide dishwasher into the opening a few inches at
a time.
• As you proceed, pull the drain hose through the
opening under the sink. Stop pushing when the
dishwasher is a few inches forward of adjacent
cabinetry.
• Make sure drain hose is not kinked under the
dishwasher and there is no interference with the
waterline and wiring or any other component.
)0 Not PushAgainst
Front Door Panel With
Knee. Damage to The
Door Panel Will Occur.
Figure 14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ddw2405blDw2406bls

Table of Contents