Check Operation; If The Dishwasher Does Not Operate - Danby DDW1801MW Instructions Manual

Check Operation:

1. Read the Use and Care Guide that came with your dishwasher.
2. Check that all parts have been installed and no steps were skipped.
3. Check that you have all the tools you used.
4. Start dishwasher and allow it to complete the shortest wash cycle. After the fi rst two minutes, unlatch door, wait fi ve
seconds, then open door.
5. Check to see that there is water in the bottom of the dishwasher tub. Check that dishwasher is working properly. If not,
disconnect power or unplug dishwasher and see below section.

If the Dishwasher Does Not Operate

First try the solutions suggested here to possibly avoid the cost of a service call.
• Has the circuit breaker tripped or the house fuse blown?
• Is the door closed tightly and latched?
• Has the cycle been set correctly to start the dishwasher?
• Is the water turned on?
If none of these work, call 1-800-263-2629
INSTALLATION INSTRUCTIONS
19