Icom GM600 Basic Manual page 9

D Information area
The 9 digit MMSI (Maritime Mobile Service Identity: DSC
self ID) code and the following indications are displayed in
the Information area.
Indication
Displayed when receiving a signal or when the
squelch is open.
Displayed while transmitting.
25W
Displayed when high power is selected.
1W
Displayed when low power is selected.
Displayed when the transceiver receives a valid
GPS data from the GPS receiver.
Blinks while invalid GPS data is being received.
Blinks when there is an unread DSC message.
Displayed when the "Internal Speaker" item is
OFF.
Displayed when the battery voltage is low.
Description
PANEL DESCRIPTION
D Channel area
The selected operating channel number, channel name, and
the following indications are displayed in the Channel area.
Indication
Displayed when a Favorite (Tag) channel is
selected.
CALL Displayed when the Call channel is selected.
DUP Displayed when a Duplex channel is selected.
D Position and Time area
The current position and time are displayed when a GPS
receiver is connected, or the position and the time has been
manually entered.
2
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4