Accessories And Installation Of Heat Exhaust Hose - INVENTOR Cool 8000btu Instruction Manual

ACCESSORIES AND INSTALLATION OF HEAT EXHAUST HOSE

Installation of the Exhaust Hose and Adapter
1. Position the Air conditioner to its required location. See "Location Requirements."
2. Insert one end of the flexible exhaust hose into the exhaust adapter.
3. Twist clockwise to lock hose into place.
4. Insert the other end of the flexible exhaust hose into the window exhaust adapter.
5. Twist clockwise to lock hose into place.
A
B
C
Length of the exhaust pipe should be ranging from 500mm-1500mm. It is recommended
●
to use it with shortest length.
When installing the exhaust pipe, it should be as straight as possible. Don't extend the
●
pipe or connect it with other exhaust pipe as it may cause damage to the unit.
Correct installation is as shown in figure (When installing it on wall, position of the hole
should be about 40cm - 130cm from the floor).
14