Adjusting Mouse Options; Cursor Type; Figure 5.3: Video Viewer Window With Local And Remote Cursors Displayed; Table 5.3: Descriptions For Figure 5.3 - Avocent DSR Series Installer/User Manual

Adjusting mouse options

The Video Viewer window mouse options affect cursor type, Cursor mode, scaling, alignment and
resetting. Mouse settings are device-specific; that is, they may be set differently for each device.
NOTE: If the device does not support the ability to disconnect and reconnect the mouse (almost all newer PCs
do), then the mouse will become disabled and the device will have to be rebooted.

Cursor type

The Video Viewer window offers five appearance choices for the local mouse cursor. You can also
choose no cursor or the default cursor.
In Single Cursor mode, the display of the local (second) cursor in the Video Viewer window turns
off and only the target device mouse pointer is visible. The only mouse movements that appear are
those of the target device remote cursor. Use Single Cursor mode when there is no need for a local
cursor. Figure 5.3 shows both the Remote Cursor and the Local Cursor displayed in the Video
Viewer window.

Figure 5.3: Video Viewer Window with Local and Remote Cursors Displayed

Table 5.3: Descriptions for Figure 5.3

Number
1
2
Description
Remote Cursor
Local Cursor
Chapter 5: The Video Viewer
1
2
57