DAELIM Q2 Owner's Manual page 66

Checking points
2. Wheel bolt, nut 6 Mon.
MARK
3. Status of front wheel
bearing
4. Status of rear wheel
bearing
64
Checking
Detail checking contents
timing
(1) Check whether assembly of nut
assembled between axle shaft and
(4,000km)
axle holder gets loose or not by
spanner.
(1) At erecting the main stand, by getting
12Mon.
the front wheel fork not moved and
(8,000km)
moving the tire by grasping its both
sides, check whether the front wheel
bearing are rattled or not.
(2) When, by lifting the wheel, grasp and
turn it, check whether the wheel
rotates smoothly and whether there is
not abnormal noise.
(1) At erecting the main stand and
12Mon.
(8,000km) grasp the both sides of tire by hand,
check whether the rear wheel
bearing get rattled or not.
(2) When, by lifting the wheel, grasp
and turn it, check whether the wheel
rotates smoothly and whether there
is not abnormal noise.
Checking
Checking points
timing
12Mon.
SWING ARM
(8,000km)
1. Status of assembled
points and damage of
swing arm
CUSHION
1. Damage, oil leaking
12Mon.
(8,000km)
Rear cushion
Front cushion
Detail checking contents
(1) Check by hands whether the
assembled points like swing arm,
engine hanger link get rattled or
not.
(2) Check by eye whether there is any
damage on swing arm.
also, check whether the fixing
bolts of swing arm, engine hanger
link get rattled or not, by spanner
(1) Check by eye whether there is oil
leakage in front cushion and rear
cushion and damage.