DAELIM Q2 Owner's Manual page 32

④ Pull the headlight socket and remove it.
⑤ Remove the rear cover.
⑥ Untie steel wire and remove the head light.
⑦ Replace with the new bulb.
HEAD LIGHT BULB
HEAD LIGHT COVER
POSITION LAMP(LED)
<REPLACEMENT OF POSITION LAMP
(LED)>
Untie 4 screws and remove the position dust cover.
①
Untie 2 screws and remove the position lamp.
②
Remove the position lamp coupler and position
③
lamp(LED).
Replace with the new position lamp(LED).
④
Assemble in the reverse order of disassembly.
⑤
30
<THE ILLUMINATION ANGLE OF
HEAD LIGHT>
By adjusting the adjuster bolt of headlight, adjust its
●
illumination angle.
By rotating screw, adjust it to up and down.
①
60 / 55W, H4
BULB
Illumination angle adjusted incorrectly
●
may dazzle a facing driver's eyes or
result in difficulty to show the forward.
<REPLACEMENT OF REAR
COMBINATION LIGHT>
① Remove the luggage box.
② Remove the center cover.
③ Remove the rear combination light ass'y.
④ Replace with the new rear combination light ass'y.
⑤ Assemble in the reverse order of disassembly.
REAR COMBINATION LIGHT LED
CAUTION
26 LED
TAIL LIGHT LENS
REAR COMBINATION LIGHT(LED) ASS'Y
CAUTION
At disassembly, be sure not to damage
●
the lens of tail light.
At replacing the lens of tail light,
●
assemble correctly the lens seal.